Product prices and availability are accurate as of 2018-08-06 01:32:51 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
JayaTel's Online General Store are delighted to stock the excellent Berkey PF-2 Fluoride / Arsenic Filter (Set of 2) - Fits Black Berkey Purifiers Only.
With so many on offer today, it is good to have a name you can trust. The Berkey PF-2 Fluoride / Arsenic Filter (Set of 2) - Fits Black Berkey Purifiers Only is certainly that and will be a perfect purchase.
For this reduced price, the Berkey PF-2 Fluoride / Arsenic Filter (Set of 2) - Fits Black Berkey Purifiers Only is highly respected and is always a regular choice with lots of people. New Millennium Concepts have added some great touches and this results in great value for money.
*** Crucial *** The PF-two is for use with Black Berkey Purifiers - If you use ceramic filters, you will need to have the PF-4 *** PF-two reduction elements are developed for use in conjunction with Black Berkey drinking water purification elements to adsorb the adhering to undesirable elements identified in consuming drinking water. Fluoride, Arsenic V and pre oxidized Arsenic III, Other residual weighty metal ions. FLUORIDE: Screening for fluoride was based mostly on 20-30ppm of the ion in the influent aqueous remedy at a stream price of no a lot more than 3 gpm for every cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Beneath the best possible conditions, effluent concentrations of less than fifty ppb had been conveniently achieved (>99.75% reduction). ARSENIC: This product uniquely targets the whole family of arsenic oxide anions as effectively as the arsenic cations. Substitution: Beneath typical conditions it is recommended that each and every set of two PF-two elements be replaced right after one,000 gallons.
Removes: Fluoride, Arsenic V and pre-oxidized Arsenic III, as well as other residual heavy metal ions.
It is recommended that each set of two PF-2 elements be replaced after 1,000 gallons. As an example, The Royal Berkey system is about 3.25 gallons and therefore the filters should be replaced after 307 (1,000/3.25 ) refills. Or in other words, If the system is refilled about one time per day they should be replaced after 10 months, if the system is refilled about twice per day they should be replaced about every 5 months.
You simply screw the PF-2 Flouride filter into the Black Berkey filters.