Product prices and availability are accurate as of 2019-05-13 09:48:52 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
We are currently offering the popular WentWorth 20 Pound Grease Trap Interceptor 10 GPM Gallons Per Minute WP-GT-10 at a slashed price. Don't pass it by - buy the WentWorth 20 Pound Grease Trap Interceptor 10 GPM Gallons Per Minute WP-GT-10 here now!
Weight: fifty three lbs.
Material: Weighty Duty 11 gauge Carbon Steel
Powder coated grey corrosion resistant
Overall proportions: 23" L x 15" W x thirteen" H
Box duration: 23" inches
Include duration: 20" inches
Flow manage tee: 2" pipe
Inlet / Outlet: 2" pipe
Grease Trap Sizing Formulation
GT = CS x .four
GT = Bare minimum grease entice ranking in gallons for every minute CS = Capacity in gallons of fixtures or sink to be discharged to the grease entice
Eliminate the stream manage tee from inside of the interceptor.
Locate the interceptor "inlet" and "outlet". Position inlet closest to the products that the interceptor will be servicing.
Put in the stream manage tee amongst products and inlet valve on the interceptor as illustrated above.
Vent the stream manage tee as illustrated above to make certain optimum overall performance of your interceptor.
Exchange the lid and securely tighten retaining lid bolt.
Verify integrity of relationship to the interceptor and mend and leaks as necessary.
Make certain all seals are assured.
A single week right after set up, verify the grease degree inside of the interceptor. These final results need to be used to establish the proper cleansing routine to be used for foreseeable future cleansing.
To cleanse, simply take away the lid and then extract or skim the grease into an vacant container. change the lid and protected the retaining bolt.
Refer to nearby codes and restrictions relating to the location specific set up and correct grease disposal.
Removable lid for easy maintenance and clean out.
Constructed of 11 gauge carbon steel w/ corrosion resistant coating.
T-vent for proper air venting is included.
Designed for removing fat, oil and grease from waste water.
Main body suspended from floor to avoid corrosion.